SOLE 16608700200 Owner's Manual page 17

PROGRAMMING THE CONSOLE
Each of the programs can be customized with your personal information and changed to suit your
needs. Some of the information asked for is necessary to ensure the readouts are correct. You will be
asked for your Age and Weight. Entering your Weight aides in calculating a more correct Calorie
reading. Although we cannot provide an exact calorie count we do want to be as close as possible.
A message about Calories: Calorie readings on every piece of exercise equipment, whether it is in a
gym or at home, are not accurate and tend to vary widely. They are meant only as a guide to monitor
your progress from workout to workout. The only way to measure your calorie burn accurately as in a
clinical setting connected to fit test monitoring equipment. This is because every person is different
and burns calories at a different rate.
EXITING DISPLAY MODE
This product is preset to a DISPLAY MODE that keeps the console continually powered on. To turn this
feature off and allow your display to go into DISPLAY MODE when not being used, please use the
following procedure:
1. When in stand‐by status, hold Start, Stop and Enter keys for five seconds to enter the Engineering
Mode.
2. Use the ▲/▼ keys to choose SELECT FUNCTION, then press the ENTER key.
3. Use the ▲/▼ keys to select the DISPLAY MODE, then press Enter key.
4. Use the ▲/▼ keys to turn ON or OFF the DISPLAY MODE function.
5. Hold the Stop key to save and exit Engineering Mode.
ENTERING A PROGRAM/CHANGING SETTINGS
Press each program button to scroll through the program selections. The profile for each program
will be displayed in the dot matrix window. Press the Program key to select a program and begin
customizing the settings. If you want to work out without entering new settings, then just press the
Start key. This will bypass the programming of data and take you directly to the start of your workout.
If you want to change the personal settings, then just follow the instructions in the Message Window.
If you start a program without changing the settings, the default settings will be used.
Note: Age and Weight default settings will change when you enter a new number. So the last Age
and Weight entered will be saved as the new default settings. If you enter Age and Weight the first
time use the elliptical you will not have to enter it every time you work out unless either Age or
Weight has changed or someone else enters a different Age and Weight.
customerservice@dyaco.ca
17
Dyaco Canada Inc. 2017