SOLE 16608700200 Owner's Manual page 12

2
SWING ARMS
151
1. Slide the left and right Lower Swing Arms (4 & 5) onto the axle of
the Mast and secure with two 5/16" Button Head Socket Bolts
(151) and two Flat Washers (147) by using Combination M5 Allen
Wrench & Phillips Head Screwdriver (108).
2. Remove the Pedal Axle (17) from left Pedal Arm (2) and install left
Connecting Arm (7) onto left Pedal Arm. Reinstall the Axle and the
screw and tighten with 12mm and 14mm wrench (111). Repeat
the same procedure again for the right Connecting Arm (8) and
Pedal Arm (3).
3. Remove the axles (16) which are on left and right connecting
arms (7 & 8).
Connect the left and right connecting arm (7 & 8) with left and right
Lower Swing Arms (4 & 5) and reinstall the axles (16) and the screw
and tighten with the Wrench (111).
customerservice@dyaco.ca
147
16
7
2
17
37
32
3
17
8
12
HARDWARE STEP 2
#147. 5/16" Flat
Washer (2 pcs)
#151. 5/16" Button Head
Socket Bolt (2 pcs)
147
151
5
16
Dyaco Canada Inc. 2017