Hitachi EP-M70E Instruction Manual page 17

Put water in the water tank and place
4
the tank cover.
Fill the water tank, making sure that it does not
exceed the line.
Wipe the moisture around the water tank.
When filling the water tank away from the unit, attach
the tank cover and hold it in place.
If the water exceeds the fill line of the water supply, it
may cause water leakage.
Securely attach the tank cover.
If it is not securely attached, it may cause water leakage
during operation.
5 Install the water tank to the unit
Wipe off water drops in the water tank holder (inner part)
during installing the water tank.
Securely install the tank, making sure that it is pressed
until the back of the unit.
If it is not securely installed, it may cause water leakage
during operation.
Also, hold down the unit to make sure that the unit will not
move during installation.
CAUTION
The water tank may be heavy when filled with water. Be
careful not to injure your fingers, nails, or your back
while handling.
EP-M70E_EN.indd 17 EP-M70E_EN.indd 17
CAUTION
CAUTION
Make sure that the water
does not exceed the line.
Tank cover
Water tank holder
Water level
Water tank
Water tank
E-17
2017/2/23 17:27:42 2017/2/23 17:27:42