Edge-Core ECS4620-28T Quick Start Manual page 1703

show ipv6 dhcp relay
destination
(i.e., this switch). This switch then broadcasts the DHCPv6 response received
from the server to the client.
◆
When the multicast option is used, the switch multicasts the modified client
request to all configured VLANs or to a specified VLAN, and enables DHCPv6
relay service for those VLANs.
◆
Up to five relay destinations may be configured by repeating this command.
◆
When issuing the no ipv6 dhcp relay destination command without any
arguments, the switch will delete all configured destination addresses and
disable DHCP for IPv6 relay for all VLANs.
E
XAMPLE
Console(config)#interface vlan 1
Console(config-if)#ipv6 dhcp relay destination 2001:0DB8:3000:3000::42
Console(config-if)#
This command shows the destination addresses or VLAN to which client messages
are forwarded for DHCP relay service.
Syntax
show ipv6 dhcp relay destination interface [vlan vlan-id]
vlan-id - ID of configured VLAN. (Range: 1-4094, no leading zeroes)
Command Mode
Privileged Exec
Example
Console#show ipv6 dhcp relay destination interface vlan 1
DHCP relay destination :
VLAN 1 :
Unicast : 2001:DB8:3000:3000::42
Console#
– 873 –
Chapter 29
| DHCP Commands
DHCP Relay