Configuring Voice Vlans - Edge-Core ECS4620-28T Quick Start Manual

Chapter 21
| VLAN Commands

Configuring Voice VLANs

show mac-vlan
Configuring Voice VLANs
This command displays MAC address-to-VLAN assignments.
Command Mode
Privileged Exec
Command Usage
Use this command to display MAC address-to-VLAN mappings.
Example
The following example displays all configured MAC address-based VLANs.
Console#show mac-vlan
MAC Address VLAN ID
----------------- --------
00-00-00-11-22-33
Console#
The switch allows you to specify a Voice VLAN for the network and set a CoS priority
for the VoIP traffic. VoIP traffic can be detected on switch ports by using the source
MAC address of packets, or by using LLDP (IEEE 802.1AB) to discover connected
VoIP devices. When VoIP traffic is detected on a configured port, the switch
automatically assigns the port to the Voice VLAN. Alternatively, switch ports can be
manually configured.
Table 115: Voice VLAN Commands
Command
voice vlan
voice vlan aging
voice vlan mac-address
switchport voice vlan
switchport voice vlan
priority
switchport voice vlan rule
switchport voice vlan
security
show voice vlan
Priority
--------
10 0
Function
Defines the Voice VLAN ID
Configures the aging time for Voice VLAN ports
Configures VoIP device MAC addresses
Sets the Voice VLAN port mode
Sets the VoIP traffic priority for ports
Sets the automatic VoIP traffic detection method for ports IC
Enables Voice VLAN security on ports
Displays Voice VLAN settings
– 612 –
Mode
GC
GC
GC
IC
IC
IC
PE