Install Os Using The Imaged Usb - HPE GL10 User Manual

8. Click the Start button to begin the USB key imaging process.
It will take approximately 15 minutes for the imaging process to complete.
9. Click the Close button to close the RUFUS utility.
10. Safely remove the imaged USB key from the workstation.

Install OS using the imaged USB

Prerequisites
The gateway must be powered off before starting this procedure.
Procedure
1. Insert the USB key into the gateway.
2. Power up the gateway on page 9.
3. Access the System BIOS settings (Accessing the system BIOS on page 39).
4. Navigate to the Boot tab.
For information on navigating the BIOS menu, see Navigating and modifying menu options on
page 40.
20 Install OS using the imaged USB