Mounting A Vesa-Mount Gateway; Dismount The Gateway; Dismounting A Wall-Mount Gateway - HPE GL10 User Manual

Mounting a VESA-mount gateway

Procedure
1. Install the bottom bracket with the four M3.5 screws.
2. Install the top-mounting bracket with the four M3 Phillips VESA-mounting bracket screws.
2
2

Dismount the gateway

Use one of the following dismounting methods, depending on where and how the gateway is mounted:
• Dismounting a wall-mount gateway on page 12
• Dismounting a rack-mount gateway on page 13
• Dismounting a VESA-mount gateway on page 13

Dismounting a wall-mount gateway

Procedure
1. Remove the screws securing the wall-mount brackets to the wall.
2. Remove the four M3.5 screws securing the wall-mount brackets to the gateway, and then remove the
brackets.
12 Mounting a VESA-mount gateway
4
3
1
4
2
2