Rear Panel Components; Connector Pin Assignments; Db9 Connector Pin Assignments For Rs422/485 - HPE GL10 User Manual

Item Description
1 Power On/Off button LED
2 Drive LED
3 Reset button
1
The reset button is indented and you might need a tool, such as a pin, to press it.

Rear panel components

Item
1
2
3
4
5
6

Connector pin assignments

DB9 connector pin assignments for RS422/485

After setting the I/O serial port from serial port 1 to serial port 2, the port supports four-wire RS422/485
signals in half-duplex mode. The DB9 connectors then have the following pin assignments.
Status
• Solid green = System on
• Off = System off
• Solid or blinking white = Drive active
• Off = Drive not active
Press to reset the system
Description
Power connector
HDMI connector
Serial port connector (RS-232 or RS-422/485)
Micro HDMI connector
VGA connector
Micro USB 2.0 connector
1
Rear panel components 7