Installing Hardware Options; Installing The Operating System; Installing Os Using A Usb Key; Create An Iso-Imaged Usb Key - HPE GL10 User Manual

Installing hardware options

Install any hardware options before initializing the gateway. For options installation information, see the
option documentation. For gateway-specific information, see Hardware options installation on page
24.

Installing the operating system

The HPE IoT gateway s are standard, Intel-based PC server systems. However, the gateway does not
include a CD or DVD-ROM device for installing the OS. To install a supported operating system in the
gateway, you can use one of the following methods:
• Installing using a USB key with an ISO image
• Installing using local media
• Installing using PXE boot via network

Installing OS using a USB key

To install an OS using a USB key, you must perform the following procedures:
•

Create an ISO-imaged USB key

• Install the OS using the imaged USB key
Create an ISO-imaged USB key
Procedure
1. On a separate workstation, download the RUFUS utility.
2. Download the portable option of the RUFUS utility.
3. Run the RUFUS utility.
Installing hardware options 17