Installing The Half-Length Wifi/Wlan Module - HPE GL10 User Manual

7. Connect SIM cable to drive.
8. Install the bottom access panel.
9. Install the antenna on page 9.
10. Mount the gateway on page 10.
11. Power up the gateway on page 9.

Installing the half-length WiFi/WLAN module

Procedure
1. Power down the gateway on page 9.
2. Dismount the gateway on page 12.
3. Remove the bottom access panel on page 15.
4. Using a T-10 Torx screwdriver, install the half-length WiFi module using at least one screw to secure
the module.
Installing the half-length WiFi/WLAN module 25