8.
Click the Start button to begin the USB key imaging process.
It will take approximately 15 minutes for the imaging process to complete.
9.
Click the Close button to close the RUFUS utility.
10. Safely remove the imaged USB key from the workstation.
Install OS using the imaged USB
Prerequisites
The gateway should be powered off before starting this procedure.
Procedure
1.
Insert the USB key into the gateway.
2.
Power up the gateway.
3.
Access the System BIOS settings.
4.
Navigate to the Boot tab.
For information on navigating the BIOS menu, see Navigating and modifying menu options.
5.
Select Hard Drive BBS Priorities.
Install OS using the imaged USB
19