Install The Wifi And Lte Combo Antennas; Mount The Gateway - HPE Edgeline EL20 User Manual

5. Mount the gateway on page 11.
6. Power up the gateway on page 10.

Install the WiFi and LTE combo antennas

You can connect WiFi antenna cables only, LTE antenna cables only, or the WiFi and LTE antenna cables
together.
Procedure
1. Power down the gateway on page 10.
2. Dismount the gateway on page 12.
3. Locate the correct port for installing the antenna cables.
For antenna connector locations, see Antenna connector locations on page 8.
4. Install the antenna cable.
5. Mount the gateway on page 11.
6. Power up the gateway on page 10.

Mount the gateway

Procedure
1. Install the wall-mount bracket on the gateway with the four Torx head screws.
2. Install the wall-mount bracket to the wall with the four Torx head screws.
Install the WiFi and LTE combo antennas 11