Dismounting A Rack-Mount Gateway; Dismounting A Vesa-Mount Gateway - HPE EDGELINE EL10 Maintenance And Service Manual

1
1
To replace the component, reverse the removal procedure.

Dismounting a rack-mount gateway

Procedure
1. Slide the rail mounts off the wall-mount brackets.
2. Remove the four screws securing the wall-mount brackets to the gateway, and then remove the
brackets.
2
1
2
To replace the component, reverse the removal procedure.

Dismounting a VESA-mount gateway

Procedure
1. Remove the four M3 Phillips screws securing the VESA-mounting brackets to the gateway.
2. Remove the top-mounting bracket.
3. Remove the four M3.5 screws securing the bottom bracket.
4. Remove the bottom bracket.
2
3
2
1
1
3
2
2 1
Dismounting a rack-mount gateway 19