Transmitting Data (Usb Interface); Options For Data Transmission - wtw pH 3310 Operating Manual

pH 3310
ba75802e02 12/2008
4.6

Transmitting data (USB interface)

4.6.1 Options for data transmission

Via the USB interface you can transmit data to a PC. The following
table shows which data are transmitted to the interface in which way:
Data
Current
measured values
of all connected
sensors
Stored measured
values
Calibration records
Note
The following rule applies: With the exception of the menus, shortly
pressing the <F2>/ [USB output] key generally outputs the display
contents to the interface (displayed measured values, measurement
datasets, calibration records).
Control Operation / description
Manual
Automatic, at
intervals
Manual
For details, see section 4.5.3.
Manual
For details, see section 4.6.
Automatic
Operation
With <F2>/[USB output].
Simultaneously with every
manual storage process
(see section 4.5.1).
_
With <F2 >/[USB output]
.
Then you can set the
transmission interval.
Simultaneously with every
automatic storage process
(see section 4.5.2).
Displayed dataset with
_
<F2 >/[USB output] after
calling up from the storage.
All datasets with the
Output to USB function.
Calibration record with
_
<F2 >/[USB output].
At the end of a calibration
procedure.
57