Data Storage; Manual Storage - wtw Oxi 7310 Operating Manual

Oxi 7310
If the storage is full
ba75931e03 12/2011
7

Data storage

You can transmit measured values (datasets) to the data storage:
 Manual storage (see section 7.1 M
 Automatic storage at intervals (see section 7.2 A
, page 36)
INTERVALS
Each storage process transmits the current dataset to the interface at the same
time.
7.1

Manual storage

You can transmit a measurement dataset to the data storage as follows. The
dataset is at the same time output to the interface:
1. Press the <STO> key shortly.
The menu for manual storage appears.
Manual data storage 4 of 500
01.07.2011 11:24:16
O2 = 7.92 mg/l 25.1 °C AR +++
Sal = 6.5
ID number:
Continue
01.07.2011
Back
2. If necessary, change and confirm the ID number (1 ... 10000) with
<><> and <ENTER>.
The dataset is stored. The meter switches to the measured value dis-
play.
The following window appears if all 500 storage locations are occupied:
Warning
Data storage full. Erase?
Yes
No
01.07.2011
Back
ANUAL STORAGE
1
08:00
08:00
Data storage
, page 35)
UTOMATIC STORAGE AT
35