Data storage
Quitting the display
40
To quit the display of stored measurement datasets, you have the following
options:
Switch directly to the measured value display with <M>.
Quit the display and move to the next higher menu level with <F1>/[Back].
7.3.2 Erasing the measurement data storage
Erasing the measurement data storage (see section 7.3.1 D
EDITING THE MEASUREMENT DATA STORAGE
7.3.3 Measurement dataset
A complete dataset includes:
ID number
Date/time
Measured value of the connected sensor
Measured temperature value of the connected sensor
AutoRead info: The AR indicator appears with the measured value if the
AutoRead criterion was met while storing (stable measured value). Other-
wise, there is no AR indicator.
Calibration evaluation: +++, ++, +, -, or no evaluation
7.3.4 Storage locations
The Oxi 7310 meter has two measurement data storages. The measured
values recorded either manually or automatic are stored separately in indi-
vidual measurement data storages.
Storage
Manual data storage
Automatic data storage
, page 38).
Maximum number of datasets
500
5000
Oxi 7310
ISPLAYING AND
ba75931e03
12/2011