wtw Oxi 7310 Operating Manual page 21

Oxi 7310
Setting the date,
time and date format
ba75931e03 12/2011
After a fall of the supply voltage (empty batteries), the date and time
are reset to 01.01.2011 00, 00:00 hours.
The date format can be switched from the display of day, month, year
(dd.mm.yyyy) to the display of month, day, year (mm/dd/yyyy or mm.dd.yyyy).
1. In the measured value display:
Using <F1_>/[Menu], open the Storage & config menu.
The instrument is in the setting mode.
2. Select and confirm the System / Clock menu with <><> and
<ENTER>.
The setting menu for the date and time opens up.
3. Select and confirm the Time menu with <><> and <ENTER>.
The hours are highlighted.
Clock
:
Date format
:
Date
:
Time
01.07.2011
Back
4. Change and confirm the setting with <><> and <ENTER>.
The minutes are highlighted.
5. Change and confirm the setting with <><> and <ENTER>.
The seconds are highlighted.
6. Change and confirm the setting with <><> and <ENTER>.
The time is set.
7. If necessary, set the Date and Date format. The setting is made similarly
to that of the time.
8. To make further settings, switch to the next higher menu level with
[Back]<F1>.
or
Switch to the measured value display with <M>.
The instrument is in the measuring mode.
dd.mm.yyyy
01.07.2011
08:00:25
08:00
Operation
21