ILMOR ONE-TOUCH Owner's Manual page 30

SECTION 6 ILMOR ONE-TOUCH OWNER'S MANUAL
6-3
3. When you engage the autopilot operation again, operate it from the
normal autopilot system side.
Failures and Corrective Actions
When the poor operation or abnormalities of the autopilot system should
arise, the buzzer of the autopilot system sounds and "Helm ECU detect
Failure" appears on the Ilmor Vessel Control System display.
At this time, engine will be in the neutral of idling automatically and the
autopilot operation is canceled, and then is changed to the normal steering
operation. Be sure to consult with the dealer of the autopilot system for
repair.
Alarm on the Ilmor Vessel Control System Display
1. Alarm "Helm ECU detect Failure" appeared.
2. Highlight "DETAIL" and press [ENTER] button.
3. If the display indicates "AUTOPILOT FAILURE", the autopilot
operation will be canceled.
ALARM!
Helm ECU
detect Failure
CLOSE DETAIL
056268-00EN00
Figure 6-3
© 6/2016 Ilmor Marine Engines, Version 1.0