Table of Contents
Advertisement
4. The A button is lit after a beep and you can operate the Joystick Control
System in the normal operation.
5. If you press the B button next, the B button is lit (both A and B buttons
are lit) after a beep and you can operate the Joystick Control System in
the slow-mode operation. In the slow-mode operation, you can operate
with the joystick just like the Joystick Control System, but navigation is
in a lower engine speed than the fast-mode operation.
6. To interrupt the slow-mode operation, press the B button again.
The light of the B button turns off and you can operate the Joystick
Control System in the fast mode operation.
NOTE: Normally, pressing the A button let you start the Joystick Control
System in the fast-mode. However, depending on the setting, it starts from the
slow-mode. In such a case, press the B button to switch to the fast-mode. For
details, consult your authorized Ilmor dealer or distributor.
A
(For system start
switch button)
Canceling (Stopping) the Joystick Control System
Operation
To cancel the Joystick Control System operation, press the Select button on
the control head or operate the two control head handles (or one control
head handle) to switch to the forward (or reverse). By doing so, the boat
can no longer be navigated by the joystick. You can now navigate and
operate the engine with the steering wheel and control head. The joystick
button is turned off and the Joystick Control System operation is released.
NOTE: If you switch by using the control head handle, be sure to return the
handle to the neutral position. If you don't return the handle to the neutral
position, the engine speed will not increase to speed.
© 6/2016 Ilmor Marine Engines, Version 1.0
B
Button
Button
(For slow-mode operation
switch button)
Figure 3-2
040998-00EN02
HOW TO OPERATE
3-3
Advertisement
Table of Contents
