Table of Contents
Advertisement
HOW TO OPERATE
2
1
3
4
048903-00X00
Figure 3-11
NOTE: If you calibrate in one diagonally forward direction (left or right), you
don't need to calibrate in the opposite diagonally forward direction.
Canceling the Calibration
To cancel the calibration, return the joystick lever to the center position
and press the A (Sideways direction) or B (Diagonal direction) button. The
beep stops and calibration is canceled.
Re-Calibration
If the boat does not move in the direction of joystick after finishing
calibration, re-calibrate the boat. You may need to calibrate the boat
multiple times before it is stable.
Resetting the Calibration
To reset calibration, press and hold the A or B button for 5 seconds in the
calibration mode. The saved calibration value is reset to the initial setting
value.
Other Settings and Adjustment
To perform other settings and adjustment, special knowledge and expertise
are required. Consult your authorized Ilmor dealer or distributor.
3-9
© 6/2016 Ilmor Marine Engines, Version 1.0
Advertisement
Table of Contents
