Failures And Corrective Actions - ILMOR ONE-TOUCH Owner's Manual

Possible cause
The button lamp does not
turn on when you press the
A button on the joystick.
The beep does not sound
when you press the A
button.
Joystick lever does not
move, is jammed or broken.
During the Joystick Control
System operation, "ALARM"
and "WARNING" appear on
the display.
The boat does not move
when you operate the
joystick lever.
There is a difference
between the joystick lever
operation direction and the
boat movement.
4-1
Section 4
FAILURES AND CORRECTIVE
ACTIONS
As inspection for failure measures, repair, and replacement require a
specialized expertise, contact your authorized Ilmor dealer or distributor.
Action
• The engines in the both sides
are not operating.
• Joystick failure
• Joystick lamp and internal
connection failure
• Display buzzer and internal
connection failure
• Joystick failure
• Joystick failure
• Electronic helm failure
• Electronic hydraulic cylinder
failure
• Joystick/ECU failure
• Hydraulic valve unit failure
• One side engine is stopped
• The power (A button) for the
joystick is not turned on
• There is no steering oil
• Joystick failure
• Hydraulic valve unit failure
• Hydraulic hose piping failure
• Electronic hydraulic cylinder
failure
• Stern drive forward/reverse
solenoid failure
• Calibration is required
• Electronic hydraulic cylinder
failure
• One side engine is stopped
Reference page
• Operate the engines in the both
sides.
• Inspect and replace
• Inspect and replace
• Inspect and replace
• Inspect and replace
• Inspect and repair
• Inspect and repair
• Inspect and repair
• Inspect and repair
• Inspect and repair
• Restart the stopped engine
• Turn on the power
• Inspect and refill
• Inspect and replace
• Inspect and repair
• Inspect and repair
• Inspect and repair
• Inspect and replace
• Calibrate
• Inspect and repair
• Restart the stopped engine
© 6/2016 Ilmor Marine Engines, Version 1.0