Daikin RZQG71L9V1 Service Manual page 30

Wired Remote Controller
1.4.2 BRC1E52/53
In order to conduct the centralized remote control using the centralized remote controller and
the unified ON/OFF controller, Group No. settings should be made by group using the operating
remote controller.
Make Group No. settings for centralized remote control using the operating remote controller.
(1) <Basic screen>
(2) <Field setting menu screen>
(3) <Group No. setting>
(4) <Group No. setting (Group)>
NOTICE
Enter the group No. and installation place of the indoor unit into the attached installation table.
Be sure to keep the installation table with the operation manual for maintenance.
16
Press and hold Cancel button for 4 seconds or more.
Field setting menu is displayed.
Group No. setting
Select
press Menu/Enter button.
Group No. setting screen is displayed.
Select Group No. setting (Group), and press Menu/Enter
button.
Group No. setting (Group) screen is displayed.
Select the group No. by using  (Up/Down) button.
Press Menu/Enter button.
ESIE15-13C
in the field setting menu, and
Remote Controller