It is dangerous for an object to touch the fan when it is turning at high speed. If your installation has a customized control system, ask your Daikin ■ Never remove the fan guard of the outdoor unit.
Page 4
(DB=dry bulb, WB=wet bulb, =cooling, =heating, =indoor, ° C NOTE Contact your Daikin dealer in case of changing the =outdoor, =temperature, =humidity) combination or setting of group control and two remote (*) For Australian models: –5~46°C controller control systems.
OPERATION lamp flashes and the "MALFUNCTION CODE" BURN-OUT OF THESE COMPONENTS. appears. figure 2 Measure: Notify your Daikin dealer and inform him/her of the display. Indoor unit If the system does not operate properly, except for the above Discharged air...
Page 7
How to clean the air outlet and outside panels Disposal requirements ■ Clean with a soft cloth. Dismantling of the unit, treatment of the refrigerant, of oil and of other parts must be done in accordance with relevant local and national ■...