Checking Indicators; Power Options - Polycom KIRK KWS1500 Installation And Maintenance Manual

Polycom wireless server installation and maintenance guide
Table of Contents

Advertisement

KIRK Wireless Server 1500 Installation and Maintenance

Checking Indicators

Verify the the repeater LED indicator is continuously on, indicating that the repeater is
functional.

Power Options

The power supply for the repeater is 9VDC, 300mA.
Base Station and Repeater installation do's and don'ts
Base Stations and Repeaters emit a 1.9 GHz radio signal to support Handsets. In order to
receive the best performance from the Base Stations and Repeaters, observe the following
rules:
• The KWS1500 Base Station provides a radio coverage radius of around 47
meters / 150 feet indoors, or up to 106 meters / 350 feet outdoors in direct line-
of-sight conditions.
• KWS1500 Base Stations should be placed in a central position relative to the
expected usage of the handsets. The points following provide guidelines for
placement of the Base Station.
• The Base Station and Repeaters are typically wall mounted.
• KIRK Repeaters require local power (standard 120V AC). A dedicated,
conditioned power source is recommended.
• The Base Stations and Repeaters MUST be placed vertically and right-side up.
Placing a Base Station or Repeater in any other fashion can reduce radio signal
penetration by up to 50 percent.
• Vertical orientation may be observed by the printed stickers located on the rear
of the unit.
• Placing Base Stations or Repeaters above ceilings or ceiling tiles is not
recommended.
• Placing Base Stations or Repeaters behind furniture or other objects that may
reduce radio signal penetration is not recommended.
• Painting of Base Stations or Repeaters or, if mounted externally, their housing or
containers, is not recommended. Paints contain metallic and/or carbon materials
that will reduce radio signal penetration.
• Place Base Stations and Repeaters between 1.8 and 2.4 meters / 6 and 8t feet
above floor level.
• Do not place Base Stations inside metallic cases. Use plastic enclosures for
external mounting.
• Never mount Base Stations or Repeaters to a metallic surface. Metallic surfaces
can cause radio signal reflections.
72160400_issue_B
40

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kirk 1500

Table of Contents