Kirk Programming Tools - Polycom KIRK KWS1500 Installation And Maintenance Manual

KIRK Wireless Server 1500 Installation and Maintenance
4.3

KIRK Programming Tools

KIRK Administration Program
The KIRK Administration Program software is required to program the KWS1500. The
Administration Program provides a graphical user interface that allows the programmer
to add KIRK Analog Interface Cards, register handsets, perform Base Station cable delay
measurements, and control many other options within the solution. A laptop PC and
NULL modem cable are required for connection to the KWS1500. Check for the latest
software revision of the Administration Program at www.polycom.com.
KIRK Service Tool
The KIRK Service Tool software is used to connect KIRK Repeaters to specific Base
Stations. The Service Tool can also be used to assign the standby text presented when
activating handsets. A laptop PC and KIRK Repeater Programming Cable are required to
connect to a KIRK Repeater. Check for the latest software revision of the Service Tool at
www.polycom.com.
Service cables
Service cables connect the KWS1500 to Base Stations and PBX Analog lines.
Cable Function
Base Station Interface
(1330 5200)
Analog Interface
(1330 4300)
US Cable Package
(1330 6001)
Programming cables
Programming cables are used to connect the installation professional's programming PC
to the KWS1500, KIRK Repeaters, and, in some cases, Handsets for programming
additions and changes. (Power supplies not listed.)
Kit
Repeater
Programming Kit
(0231 9508)
KWS1500
Programming Cable
(part of 1330 6001)
Handset
Programming Kit
(0231 9508)
72160400_issue_B
Cable Type Description
25-pin male Connection from the KWS1500 to the IDF.
Each cable supports 8 Base Stations.
25-pin female Connection from the KWS1500 to the IDF.
Each cable supports 8 analog PBX connections.
Cable Kit Includes one each of the following:
Base Station Interface cable
Analog interface card cable
KWS1500 server power cable
NULL modem programming cable
Parts
Service Tool Software
Y-splitter cable
Repeater Serial-RJ cable
NULL modem cable
Y-splitter cable
Serial – RJ cable
Description
Connects a laptop PC to a KIRK Repeater
for programming assignment of the
Repeater to a Base Station.
Connects a laptop PC to the KWS1500.
Allows connection from the
Administration Program.
Connects a laptop PC to the Handset via
the Service Tool.
Same as Repeater Programming Kit.
30