The Deployment Process; Figure 4-1. The Deployment Process - Polycom SoundStation2 EX, FX, VS4000 Integrator's Reference Manual

Integrators' Reference Manual for ViewStation EX, ViewStation FX, and VS4000

The Deployment Process

Pre-deployment
Identify the site's
communication needs
Determine the site's...
Network topology
Bandwidth
requirements
Policies
Dial plan (includes
services plan)
78
The diagram below summarizes the tasks involved in the
deployment process. This chapter assumes that the appropriate
products have been ordered, and that you have done the
appropriate predeployment tasks.
Deployment
Install PathNavigator and
configure it without
configuring MGC services
and DID
Install MGCManager and
use it to configure MGC
In PathNavigator, configure
MGC services and DID
Install GMS with GDS
Install WebCommander
Configure GMS and
WebCommander
Install and configure
endpoints

Figure 4-1. The Deployment Process

This chapter discusses installing and configuring endpoints.
Post-deployment
Place test calls:
IP to IP
IP to ISDN
ISDN to IP
ISDN to ISDN
www.polycom.com