Table of Contents
Advertisement
Integrators' Reference Manual for ViewStation EX, ViewStation FX, and VS4000
108
4.
In the Com1 Properties window, under Port Settings, select the
following settings:
•
Baud rate should match that of the system (default is 9600)
•
Data bits = 8
Parity = none
•
•
Stop bits = 1
•
Flow control setting should match that of the system. None
is the default. Some third-party control panels may require
to be set to Hardware.
5.
Click OK.
www.polycom.com
Advertisement
Table of Contents
Need help?
Do you have a question about the SoundStation2 EX, FX, VS4000 and is the answer not in the manual?