Table 3-4. Isdn Pri Requirements - Polycom SoundStation2 EX, FX, VS4000 Integrator's Reference Manual

Integrators' Reference Manual for ViewStation EX, ViewStation FX, and VS4000
64
The PRI T1 needs to be provisioned for the ViewStation FX and
VS4000 systems as follows:

Table 3-4. ISDN PRI Requirements

Line settings ESF/B8ZS (default)
Extended Super Frame B8ZS is modem standard for
T1/PRI line encoding and framing
Line termination CPE (user side) only
type
The required termination is built into the system and
most access switches
Supported PRI AT&T 4ESS, AT&T 5ESS, NI-1, NI-2, Siemens,
switch protocols Nortel DMS 100, and Nortel 250
These are standard protocols for North America
Number of 23 B-channels dialable at 64 or 56 Kbps, and one D
channels channel
Ensure that you have 64 Kbps clear channel service
Number of 1 (single PRI)
network
interfaces
Line build-out DSU+CSU (0 to –22.5dB attenuation), DSU-only
modes (DSX 0-665 feet)
Physical distance is offset by the settings in the user
interface
Clocking Must be derived from the external network or the
PBX
Terminal 0-63
Endpoint ID
This identifies the PRI endpoint; the common default
(TEI)
is 0
Numbering One local directory number per interface (23
channels)
D-channel slot 24
number
Included to verify where the D channel is; this is
where additional diagnostic information resides
Call-by-call Values 0-31 service codes for GVPN/PN/UPN
service codes network-specific services
www.polycom.com