Switching Power Status; Starting Engine - Subaru Impreza 2017 Owner's Manual

& Switching power status
1. Apply the parking brake.
2. Shift the select lever into the "P"
position.
3. Depress the brake pedal.
4. Hold the access key fob with the
buttons facing you, and touch the push-
button ignition switch with it.
When the communication between the
access key fob and the vehicle is com-
pleted, a chime (ding) will sound, and the
operation indicator on the push-button
ignition switch illuminates in green. At
the same time, the status of the push-
button ignition switch changes to either of
the following.
In case of emergency/Access key fob – if access key fob does not operate properly
. When the keyless access with push-
button start system is deactivated:
"ACC"
. Under other conditions: "ON"
5. When the keyless access with push-
button start system is deactivated, press
the push-button ignition switch with the
brake pedal released. The status of the
push-button ignition switch then changes
to "ON".
NOTE
If the power does not switch even
though the above procedure was fol-
lowed precisely, we recommend that
you contact your SUBARU dealer.
& Starting engine
1. Apply the parking brake.
2. Shift the select lever into the "P"
position.
3. Depress the brake pedal.
4. Hold the access key fob with the
buttons facing you, and touch the push-
button ignition switch with it.
When the communication between the
access key fob and the vehicle is com-
pleted, a chime (ding) will sound, and the
operation indicator on the push-button
ignition switch illuminates in green. At
the same time, the push-button ignition
switch turns to the "ACC" or "ON" position.
5. Within 5 seconds after the operation
indicator illuminates in green, while de-
pressing the brake pedal, press the push-
button ignition switch.
– CONTINUED –
9-29