Subaru Impreza 2017 Owner's Manual page 70

1-42
Seat, seatbelt and SRS airbags/Child restraint systems
equipped with a lock-off (a seatbelt locking
feature), secure the child restraint system
using a locking clip.
9. Before having a child sit in the child
restraint system, try to move it back and
forth and right and left to check if it is firmly
secured. Sometimes a child restraint can
be more firmly secured by pushing it down
into the seat cushion and then tightening
the seatbelt.
! Models with ALR
NOTE
If using ALR mode is not recom-
mended by the manufacturer's instruc-
tions supplied with the child restraint
system, use the lock-off lever or the
locking clip instead of using ALR
mode. In this case, refer to the previous
section "Models without ALR" F1-40.
Through the following steps, the child
restraint system is fastened by changing
the seatbelt from ELR mode to ALR mode.
1. Remove the head restraint of the rear
seating position where the child restraint
system is to be installed.
2. Place the child restraint system in the
seat.
3. Run the lap and shoulder belt through
or around the child restraint system
following the instructions provided by its
manufacturer.
4. Insert the tongue plate into the buckle
until you hear a click.