Subaru Impreza 2017 Owner's Manual page 305

Cruise control indicator light (type B)
The cruise control indicator light on the
combination meter will illuminate.
2. Depress the accelerator pedal until the
vehicle reaches the desired speed.
3. Press the RES/SET switch to the
SET side and release it. Then release
the accelerator pedal.
NOTE
If the set vehicle speed has not been
memorized (other than when it has
been temporarily canceled), the vehicle
speed can be set even if the "RES/SET"
switch is pressed to the "RES" side.
Cruise control set indicator light (type A)
1) When setting the displayed unit as
MPH
2) When setting the displayed unit as km/h
Starting and operating/Cruise control
Cruise control set indicator light (type B)
1) When setting the displayed unit as
MPH
2) When setting the displayed unit as km/h
At this time, the cruise control set indicator
light is illuminated in the combination
meter. The set speed will be shown on
the combination meter. You can change
the displayed units by operating the
combination meter display.
. For type A meter details , refer to
Combination meter settings F3-11.
. For type B meter details, refer to
Menu screens F3-42.
The vehicle will maintain the desired
speed.
– CONTINUED –
7-37