Switch Location; Switching Power Status - Subaru Impreza 2017 Owner's Manual

Instruments and controls/Push–button ignition switch (models with "keyless access with push–button start system")
occurs, or not to issue a warning when
any malfunction occurs.
– On the instrument panel
– On the floor
– Inside the glove box
– Inside the door trim pocket
– On the rear seat
– On the rear shelf (4-door models)
– Inside the trunk (4-door models)
– In the cargo area (5-door models)
. When operating the push-button
ignition switch or starting the engine,
if the battery of the access key fob is
discharged, perform the procedure
described in "Access key fob – if
access key fob does not operate prop-
erly" F9-28. In such a case, replace the
battery immediately. Refer to "Repla-
cing battery of access key fob" F11-54.
& Switch location
Left-hand drive models
Right-hand drive models
1) Operation indicator
2) Push-button ignition switch
& Switching power status
The power is switched every time the
push-button ignition switch is pressed.
1. Carry the access key fob, and sit in the
driver s seat.
2. Shift the select lever in the P posi-
tion.
3. Press the push-button ignition switch
without depressing the brake pedal. Every
time the button is pressed, the power is
switched in the sequence of
ACC , ON and OFF . The operation
indicator on the push-button ignition
switch illuminates or turns off as shown
in the following chart.
Power
Indicator color Operation
status
OFF Turned off Power is turned off.
The following parts
can be used:
ACC Orange wipers, washer,
audio and acces-
sory power outlet.
Orange
(while engine is
stopped)
All electrical parts
ON
can be used.
Turned off
(while engine is
running)
– CONTINUED –
3-7
OFF ,