Subaru Impreza 2017 Owner's Manual page 91

is restrained in it. (See WARNING that
follows.)
. The system is being checked after the
ignition switch is turned to the ON
position.
. The front passenger s occupant detec-
tion system is malfunctioning.
WARNING
NEVER INSTALL A FORWARD OR
REARWARD FACING CHILD SEAT
IN THE FRONT PASSENGER'S SEAT
EVEN IF THE FRONT PASSEN-
GER'S SRS FRONTAL AIRBAG IS
DEACTIVATED. Be sure to install it
in the REAR seat in a correct
manner. Also, it is strongly recom-
mended that any forward facing
child seat or booster seat be in-
stalled in the REAR seat, and that
even children who have outgrown a
child restraint system be also
seated in the REAR seat. This is
because children sitting in the front
passenger's seat may be killed or
severely injured should the front
passenger's SRS frontal airbag de-
ploy. REAR seats are the safest
place for children.
Seat, seatbelt and SRS airbags/*SRS airbag (Supplemental Restraint System airbag)
CAUTION
When the front passenger's seat is
occupied by an infant in an appro-
priate child restraint system, ob-
serve the following precautions.
Failure to do so may interfere with
the proper operation of the occu-
pant detection system, activating
the front passenger's SRS frontal
airbag even though that seat is
occupied by the infant in the child
restraint system.
. Do not place any article (includ-
ing electronic devices) on the
seat other than the infant in the
child restraint system.
. Do not place more than one
infant in the child restraint sys-
tem.
! If the front passenger's frontal
airbag ON indicator illuminates
and the OFF indicator turns off
even when an infant or a small
child is in a child restraint sys-
tem (including booster seat)
: Front passenger s frontal airbag ON
indicator
: Front passenger s frontal airbag OFF
indicator
1. Turn the ignition switch to the LOCK /
OFF position.
2. Remove the child restraint system
from the seat.
3. By referring to the child restraint
manufacturer s recommendations as well
as the child restraint system installation
procedures in Child restraint systems
F1-25, correctly install the child restraint
– CONTINUED –
1-63