To Temporarily Cancel The Cruise Control; To Turn Off The Cruise Control; To Change The Cruising Speed - Subaru Impreza 2017 Owner's Manual

7-38
Starting and operating/Cruise control
Vehicle speed can be temporarily in-
creased while driving with the cruise
control activated. Simply depress the
accelerator pedal to accelerate the vehi-
cle. When the accelerator pedal is re-
leased, the vehicle will return to and
maintain the previous cruising speed.
& To temporarily cancel the
cruise control
The cruise control can be temporarily
canceled in the following ways.
. Press the CANCEL button.
. Depress the brake pedal.
WARNING
You can cancel the cruise control by
shifting the select lever into the "N"
position. However, do not shift the
lever into the "N" position while
driving except in case of emergency.
If the select lever is shifted into the
"N" position, the engine brake will
no longer work. This could result in
an accident.
The cruise control set indicator light in the
combination meter turns off when the
cruise control is canceled.
To resume the cruise control after it has
been temporarily canceled and with vehi-
cle speed of approximately 30 km/h (20
mph) or more, press the
switch to the RES side to return to the
original cruising speed automatically.
The cruise control set indicator light in the
combination meter will automatically illu-
minate at this time.
& To turn off the cruise control
There are two ways to turn off the cruise
control:
. Press the cruise control main button
again.
. Turn the ignition switch to the ACC or
LOCK/OFF position (but only when the
vehicle is completely stopped).
& To change the cruising speed
! To increase the speed (by the "RES/
SET" switch)
RES/SET
Press the RES/SET switch to the RES
side and hold it until the vehicle reaches
the desired speed. Then, release the
switch. The vehicle speed at that moment