Subaru Impreza 2017 Owner's Manual page 74

1-46
Seat, seatbelt and SRS airbags/Child restraint systems
1. Open the covers.
1) Arrow
For type B models:
Push the cover down all the way so that
the arrow on the back side of the cover is
hidden. If it is not pushed down all the way,
the following may occur.
. Noise is produced during driving
. Cover damage when a child re-
straint system is installed
. Installation of child restraint system
hindered
CAUTION
. Ensure that the cover is comple-
tely closed when a child restraint
system is not in use.
. If the cover is not closed com-
pletely, there is a danger of
personal injury to the vehicle
occupants and of damage to the
cover.
2. Remove the head restraint of the rear
seating position where the child restraint
system is to be installed.
3. While following the instructions sup-
plied by the child restraint system manu-
facturer, connect the connectors of the
child restraint system to the anchor bars.
When the connectors are fastened, make
sure that the adjacent seatbelts are not
caught.