Unlock Using Pin Code Access - Subaru Impreza 2017 Owner's Manual

! Door unlock selection function (if
equipped)
The unlocking doors can be selected.
The settings are the following.
. Operational:
Only the driver s door or the rear gate will
be unlocked.
. Non-operational:
All doors and the rear gate are unlocked.
NOTE
. This setting can be changed by a
SUBARU dealer.
. For security reasons, confirm the
setting is set as "operational" or "non-
operational".
! Automatic locking (models without
double locking system)
If any of the doors or the rear gate was not
opened within 30 seconds after unlocking,
they will be automatically locked again.
The function s operational/non-operational
setting and the time until automatic locking
takes place can be changed by a
SUBARU dealer. For more details, we
recommend that you contact a SUBARU
dealer.
For models with the combination meter
display (color LCD), the setting and the
time can be changed by operating the
Keys and doors/Keyless access with push–button start system
combination meter display (color LCD).
For details, refer to Vehicle Setting F3-
44.
& Unlock using PIN Code Ac-
cess
While all doors including the rear gate (5-
door models) are locked, you can unlock
the doors (including rear gate) without a
key by performing the following proce-
dure.
. 4-door models: Press the trunk opener
button.
. 5-door models: Press the rear lock
button.
4-door models
1) Trunk opener button
5-door models
1) Rear lock button
NOTE
PIN Code Access will be helpful if the
access key fob is accidentally left in the
vehicle. It is recommended that a 5-
digit security code (PIN code) be
registered.
! Preparation for registering a PIN
code
1. Turn off the ignition switch.
2. Close all doors (including trunk/rear
gate).
3. Press and hold the button on the
access key fob. Then all doors (including
rear gate) will be locked.
4. Keep the button pressed, and
– CONTINUED –
2-11