Air Inlet Selection; To Turn Off The Climate Control System; Defrosting - Subaru Impreza 2017 Owner's Manual

& Air inlet selection
Select the air inlet by pressing the air inlet
selection button.
. Recirculation:
When the indicator light on the air inlet
selection button illuminates, interior air is
recirculated inside the vehicle. Press the
air inlet selection button to the ON position
for fast cooling with the air conditioner or
when driving on a dusty road.
. Outside air circulation:
When the indicator light on the air inlet
selection button does not illuminate, out-
side air is drawn into the passenger
compartment. Press the air inlet selection
button to the OFF position when the
interior has cooled to a comfortable
temperature and the road is no longer
dusty.
WARNING
Continued operation in the ON posi-
tion may fog up the windows. Switch
to the OFF position as soon as the
outside conditions are no longer
dusty.
NOTE
. When the indicator light on the air
inlet selection button is flashing at
engine starting, a malfunction might
be occurring in the electrical system.
We recommend that you contact your
SUBARU dealer for inspection.
. The indicator light on the air inlet
selection button may flash in the
following cases. However, this does
not indicate a malfunction.
– After the vehicle battery has been
disconnected and reconnected.
– When the vehicle battery voltage
is low.
& To turn off the climate control
system

To turn off the climate control system:

. Type A and B: select the OFF position
using the fan speed control dial.
. Type C and D: press the ON/OFF
button.
Climate control/Defrosting

Defrosting

This function is selected to defrost or
dehumidify the windshield and front door
windows.
Windshield defroster outlets and both side
outlets of the instrument panel.
To turn on the defrost mode:
. Type A and B: select the
position using the airflow mode selection
dial.
. Type C: press the defroster button, or
select the position using the airflow
mode selection dial.
. Type D: press the defroster button, or
select the position using the airflow
mode selection button.
– CONTINUED –
4-11
or