Headlight Flasher; High Beam Assist Function (If Equipped) - Subaru Impreza 2017 Owner's Manual

& Headlight flasher
CAUTION
Do not hold the lever in the flashing
position for more than just a few
seconds.
To flash the headlights, pull the lever
toward you and then release it. The high
beam will stay on for as long as you hold
the lever.
When the headlights are on high beam,
the high beam indicator light
combination meter is also on.
& High Beam Assist function (if
equipped)
NOTE
. Do not overestimate the capacity of
the High Beam Assist function. The
driver always has the responsibility to
understand the surrounding situation,
to drive safely, and to change the
headlight mode manually if necessary.
. Observe the following points in
order to operate the High Beam Assist
function properly.
– Do not attach labels or stickers to
on the
the windshield glass near the cam-
era.
– Do not attach any accessories
near the inside mirror and camera.
– Do not place any objects over the
Instruments and controls/Light control switch
dashboard.
– Do not touch the lens of the
camera.
– Do not touch the camera.
– Do not apply any strong impact
to the camera or the inside mirror.
– Do not disassemble the camera
and inside mirror.
– Do not spill liquid on the inside
mirror and camera.
– Do not carry excessive luggage.
– Do not modify the vehicle.
– Always replace the windshield
glass with genuine SUBARU parts
(or equivalent products).
1) Camera for High Beam Assist function
The high beam assist function automati-
cally changes the headlight from high
3-73
– CONTINUED –