Attaching The Mounting Brackets To The Router - HP FlexNetwork HSR6802 Installation Manual

Figure 6 Marking the positions of cage nuts
5RU
3. Insert one edge of a cage nut into the hole.
4. Use a flat-blade screwdriver to compress the other edge of the cage nut, and then push the
cage nut fully into the hole.
5. Repeat steps 3 and 4 to install other cage nuts to all the marked positions on the rack post.
Figure 7 Installing a cage nut

Attaching the mounting brackets to the router

If you have ordered an air filter, install it to the router before you install the mounting brackets. For the
installation procedure, see
Before you install the router in a rack, install the front mounting brackets to the left and right sides of
the router.
To attach the front mounting brackets to the router, align the screw holes on the mounting brackets
with the screw holes on the left and right sides of the chassis, and then use a Phillips screwdriver to
fasten the screws.
"Installing an air filter."
11
5RU