HP FlexNetwork HSR6802 Installation Manual page 97

RSE-X2 front panel
Figure 76 RSE-X2 front panel
(1) Management Ethernet port (MANAGEMENT)
(3) MPU status LEDs
(6) Console port (CONSOLE)
(9) CF card status LED
RSE-X2 specifications
Item
Flash
Memory type and size
NVRAM
Console port
AUX port
Management Ethernet
port
CF card
USB ports
Switching capability
Reset button
Hot swapping
NOTE:
•
Flash memory stores the BootWare image.
•
SDRAM stores running configuration and buffers data during data forwarding.
•
Non-volatile random access memory (NVRAM) stores system exception logs.
(4) Reset button (RESET)
(7) CF card slot
Specification
8 MB
•
Default—Two 2-GB DDR3 SDRAMs
•
Maximum—Two 2-GB DDR3 SDRAMs
128 KB
1
9600 bps (default) to 115200 bps
1
9600 bps (default) to 115200 bps
1
10Base-T/100Base-TX/1000Base-T
•
1 GB by default for the built-in CF card
•
256 MB, 512 MB, and 1 GB for an optional external CF card (CF cards less
than 256 MB are not supported.)
1
(USB 0: Type A connector, operating in the host mode)
512 Gbps
Supporting integrated switch fabric
1
Supported
91
(2) AUX port (AUX)
(5) USB port
(8) CF card button