Spe Leds - HP FlexNetwork HSR6802 Installation Manual

Figure 103 SAP-28GE LEDs
Table 66 SAP-28GE LED description
LED
(green)
(yellow/green)
(yellow/green)
(yellow/green)

SPE LEDs

For SPE LED description, see the corresponding datasheet.
Status
Off
Slow flashing (1 Hz)
RUN
Fast flashing (8 Hz)
Off
Status
Steady green
LEDs for
combo
Flashing green
fiber ports
GE16 to
Steady yellow
GE27
Flashing yellow
Off
Steady green
Status
LEDs for
combo Flashing green
copper
ports GE16
Steady yellow
to GE27
Flashing yellow
Off
Steady green
Status
LEDs for
SFP ports Flashing green
GE0 to
GE15
Steady yellow
Flashing yellow
Description
No power input is available or the SAP-28GE has
failed.
The SAP-28GE is operating correctly.
System software is being loaded or the SAP-28GE
is not operating.
CAUTION:
To avoid hardware damage, do not power off the
router, or insert or remove the SAP-28GE when
system software is being loaded.
No link is present.
A 1000 Mbps link is present.
Data is being received or transmitted at 1000
Mbps.
A 100 Mbps link is present.
Data is being received or transmitted at 100 Mbps.
No link is present.
A 1000 Mbps link is present.
Data is being received or transmitted at 1000
Mbps.
A 10/100 Mbps link is present.
Data is being received or transmitted at 10/100
Mbps.
No link is present.
A 1000 Mbps link is present.
Data is being received or transmitted at 1000
Mbps.
A 100 Mbps link is present.
Data is being received or transmitted at 100 Mbps.
118