Figure 2 Installation flowchart
Check the workbench
Installing the router
Mounting the router on a workbench
IMPORTANT:
•
Ensure good ventilation and 10 cm (3.9 in) of clearance around the chassis for heat dissipation.
Avoid placing heavy objects on the router.
•
To mount the router on a workbench:
1.
Make sure the workbench is clean, stable, and correctly grounded.
2.
Place the router upside down on the workbench and attach the rubber feet to the four round
holes in the chassis bottom.
Mount the router on a
workbench
Connect the router to a console
Start
Install the router
Ground the router
Install antennas
Connect interface cables
terminal
Connect the power adapter
Verify the installation
Power on the router
Operate correctly ?
Yes
End
7
Install the router on a wall
Install wall-mounting screws
Troubleshoot the router
Power off the router
No