HP FlexNetwork HSR6802 Installation Manual page 122

Table 63 SAP-48GBP LED description
LED
RUN
(green)
Status
LEDs
for SFP
0 to
(yellow/green)
SFP 47
Figure 101 SAP-4EXP LEDs
Table 64 SAP-4EXP LED description
LED
RUN
(green)
Status
LEDs for
SFP+ 0 to
(yellow/green) SFP+ 3
Status Description
No power input is available or the SAP-48GBP has
Off
failed.
Slow flashing (1 Hz) The SAP-48GBP is operating correctly.
System software is being loaded or the SAP-48GBP is
not operating.
Fast flashing (8 Hz)
To avoid hardware damage, do not power off the router,
or insert or remove the SAP-48GBP when system
software is being loaded.
Off No link is present.
Steady green A 1000 Mbps link is present.
Flashing green Data is being received or transmitted at 1000 Mbps.
Steady yellow A 100 Mbps link is present.
Flashing yellow Data is being received or transmitted at 100 Mbps.
Status
Off
Slow flashing (1 Hz)
Fast flashing (8 Hz)
Off
Steady green
Flashing green
Steady yellow
116
CAUTION:
Description
No power input is available or the SAP-4EXP has
failed.
The SAP-4EXP is operating correctly.
System software is being loaded or the SAP-4EXP
is not operating.
CAUTION:
To avoid hardware damage, do not power off the
router, or insert or remove the SAP-4EXP when
system software is being loaded.
No link is present.
A 10 Gbps link is present.
Data is being received or transmitted at 10 Gbps.
The transceiver module failed to be detected.