Using The Quick Connect Feature - GE 350-A9 Quick Start Manual

SOFTWARE SETUP
Using the Quick
Connect feature
76
8. Click the Read Order Code button to connect to the 350 device and upload the order
code.
9. Click OK when the relay order code has been received. The new device will be added
to the Site List window (or Online window) located in the top left corner of the main
EnerVista 3 Series Setup window.
The 350 Site Device has now been configured for USB communications. Proceed to
Connecting to the Relay below, to begin communications.
The Quick Connect button can be used to establish a fast connection through the front
panel USB port of a 350 relay, or through the Ethernet port. The following window will
appear when the QuickConnect button is pressed:
As indicated by the window, the "Quick Connect" feature can quickly connect the EnerVista
3 Series Setup software to a 350 front port if the USB is selected in the interface drop-down
list. Select "SR3 Relay" and press the Connect button. Ethernet can also be used as the
interface for Quick Connect as shown above.
When connected, a new Site called "Quick Connect" will appear in the Site List window.
CHAPTER 3: INTERFACES
350 FEEDER PROTECTION SYSTEM – QUICKSTART GUIDE