GE 350-A9 Quick Start Manual page 67

GE
Grid Solutions
350 Feeder Protection System
Chapter 3: Interfaces
350 FEEDER PROTECTION SYSTEM – QUICKSTART GUIDE
Interfaces
There are two methods of interfacing with the 350 Feeder Protection System.
• Interfacing via the relay keypad and display.
• Interfacing via the EnerVista 3 Series Setup software.
This section provides an overview of the interfacing methods available with the 350 using
the relay control panels and EnerVista 3 Series Setup software. For additional details on
interface parameters (for example, settings, actual values, etc.), refer to the individual
chapters.
61