Introduction - MVC-Data AccessZone GC501 User Manual

AccessZone ® - GC500 Series – GC501-GC504 User Manual

2 Introduction

The AccessZone GC500 series GC501-GC504 are stand-alone access control systems. They are well
suited for use in private homes, shops and minor companies.
They are unique wireless access control systems built on Bluetooth wireless technology – a
wireless technology that operates in the license free ISM band at 2.4 GHz.
The systems only allow access to users who can be identified by their unique Key ID and optional a
4 digit PIN code for increased security. The used mobile phones or other Bluetooth devices must
be set to "visible" to allow them to be discovered by the system.
The GC500 series eliminates the need for mechanical readers and keyboards outside the secured
area. This removes the risk for property damage and breakdown due to harsh environmental
conditions and heavy use.
Please refer to the GC500 Firmware Release Note for the latest changes.
The latest firmware versions introduces:
New improved validation of Bluetooth module BD address
The BD address is read back and compared against factory value in production data
Improved end-user notification when waiting for PIN code
The green LED in the middle starts flashing when a valid user has been detected and it is
waiting for user to enter the PIN code
Added support for a new "Re-trig Gate Open" feature
This feature can be enabled/diabled by a system command and it will re-trig the opening
time as long as the same valid user is detected. I.e. the door/gate will not be closed
All information is subject to change without notice. All other products and brand names are registered trademarks of their respective companies
Copyright © 2005-2010 All rights reserved MVC-Data ApS Skalhuse 5 9240 Nibe Denmark Web www.mvc-data.com E-mail info@mvc-data.com
2010-07-06 US 1.17
6/34
Phone +45 25 12 84 02