How To Configure The System; Commands Via Mobile - MVC-Data AccessZone GC501 User Manual

The new generation of wireless access control systems
Table of Contents

Advertisement

AccessZone ® - GC500 Series – GC501-GC504 User Manual

7 How to Configure the System

This section describes how to enter system commands and how to enable the system for
configuration. Section 8 System Commands describes the different commands in details.
7.1

Commands via Mobile

System configuration (adding/deleting users and changing system settings) can be done from any
Bluetooth enabled mobile phone as long as the user knows the 8 digit Master PIN code.
Note!
It is not necessary to install any software on the mobile phone or use any PC tool.
The mobile phone must support at least 20 characters as "Friendly Name" (also called "Phone
Name"). This is the name revealed for other Bluetooth devices.
A system command (e.g. "01,0022b4b62918,1234") is entered by temporarily changing the
mobiles Bluetooth "Friendly Name". Refer to section 8 System Commands.
Please refer to the User Manual for a specific mobile phone for how to change the Bluetooth
friendly name.
Caution!
The Bluetooth specification states a maximum length of 248 characters as Friendly Name.
However, most mobile phones have limited the space allowed for Friendly Name. A minimum of
20 characters must be supported by the used mobile phone.
All commands must be followed by the 8 digit Master PIN code for safe use. The system gives 3
short beeps to indicate that a valid command has been found and the Master PIN code is required.
The user will automatically be prompted when to enter the Master PIN code.
Note!
This is not the normal 4 digit user access PIN code.
Please note when entering the commands:
All command parameters (enclosed by <>) must be separated by a comma ','
No spaces between values are allowed
Have the exact length as specified. I.e. no additional characters in the end
A '-' indicates an integer range 1,2,3...
All information is subject to change without notice. All other products and brand names are registered trademarks of their respective companies
Copyright © 2005-2010 All rights reserved MVC-Data ApS Skalhuse 5 9240 Nibe Denmark Web
www.mvc-data.com
E-mail
info@mvc-data.com
2010-07-06 US 1.17
10/34
Phone +45 25 12 84 02

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AccessZone GC501 and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Accesszone gc504Accesszone gc502Accesszone gc503

Table of Contents