System Commands; Change 8 Digit Master Pin Code Command - MVC-Data AccessZone GC501 User Manual

AccessZone ® - GC500 Series – GC501-GC504 User Manual

8 System Commands

This section describes the simple and easy to use mobile configuration command set for GC501 –
GC504 - the stand alone series.
8.1

Change 8 digit Master PIN Code Command

This command changes the Master PIN code which is used to validate all system commands. The
system will automatically prompt the user for the Master PIN code.
The Master PIN code is a system code for authenticating the user/system administrator.
Caution!
The default Master PIN code should be changed before using the system. The Master PIN code
should only be known by a system administrator or a limited number of people to avoid
unauthorized use.
Parameters
<New Master PIN code for
the system>
Total length = 8 digits
Example:
To change Master PIN to 12345678 enter: "12345678"
Note!
The present (old) Master PIN code must be entered on the
mobile to enroll the new Master PIN code.
The Master PIN code can be reset to factory value. Please
see section 15 Default Factory System Settings
System administrator should store the new Master PIN
code in a system log. Please see 17 Appendix B – System
Master PIN Code
1)
The Master PIN code must be entered within 15 seconds before it continues to scan for another
user.
All information is subject to change without notice. All other products and brand names are registered trademarks of their respective companies
Copyright © 2005-2010 All rights reserved MVC-Data ApS Skalhuse 5 9240 Nibe Denmark Web
Values Description
The Master PIN code for adding/removing users
8 digits and change system settings
Default: "12345678"
www.mvc-data.com
1)
E-mail info@mvc-data.com Phone +45 25 12 84 02
2010-07-06 US 1.17
14/34