Mobile Phone As Access Key - MVC-Data AccessZone GC501 User Manual

The new generation of wireless access control systems
Table of Contents

Advertisement

AccessZone ® - GC500 Series – GC501-GC504 User Manual

19.3 Mobile Phone as Access Key:

Any Bluetooth enabled mobile phone can be used as access key. No software has to be installed
on the mobile phone.
The system will detect the mobile phone when it comes within the specified detection range.
TIP!
No pairing or search for devices must be active on the used mobile phone.
Steps:
1) Enable Bluetooth on mobile phone and set it to visible. Refer to the mobile phone's User
Manual
2) Enter the 4 digit access PIN code when prompt (If PIN code is required)
Note!
The time (Bluetooth inquiry scan time) a mobile phone uses to scan for other Bluetooth devices,
that want to connect to it, is typically set to a low value to preserve battery power. I.e. the time to
discover a nearby Bluetooth enabled mobile phone strongly depends on implementation details
for a particular mobile phone.
All information is subject to change without notice. All other products and brand names are registered trademarks of their respective companies
2010-07-06 US 1.17
34/34
Copyright © 2005-2010 All rights reserved MVC-Data ApS Skalhuse 5 9240 Nibe Denmark Web
www.mvc-data.com
E-mail
info@mvc-data.com
Phone +45 25 12 84 02

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AccessZone GC501 and is the answer not in the manual?

This manual is also suitable for:

Accesszone gc504Accesszone gc502Accesszone gc503

Table of Contents