Add New User Command - MVC-Data AccessZone GC501 User Manual

AccessZone ® - GC500 Series – GC501-GC504 User Manual
8.2

Add new User Command

This command adds a new user to the system. This is also used for editing an exiting user. Make
sure to store the user on the same storage position.
This command can also be execute in normal mode by the privileged users (administrators) on
storage position 01 and 02.
Parameters
<Add storage position>,
<BD address of new device>,
<PIN code for user>
<power class>
(optional – not required)
1)
The privileged users (administrators) must be added with a PIN code to be able to add other
users. This is a security requirement.
2)
The access PIN code must be entered within 15 seconds before it continues to scan for another
user.
3)
Can be used to compensate (normalize), in some degree, for power differences and antenna
location between the used Bluetooth keys (e.g. mobile phones):
If a device must be closer to the reader than most others before access is granted
- set parameter = '3' (weak device)
If a device gets access further away from the reader than most others
- set parameter = '1' (strong device)
All information is subject to change without notice. All other products and brand names are registered trademarks of their respective companies
Copyright © 2005-2010 All rights reserved MVC-Data ApS Skalhuse 5 9240 Nibe Denmark Web
Values Description
Position in system database to store the user
2 digits
01-02 Privileged users (administrators): "01"-"02"
03-07 Normal users GC501: "03"-"07"
03-12 Normal users GC502: "03"-"12"
03-22 Normal users GC503: "03"-"22"
03-52 Normal users GC504: "03"-"52"
Ex. position 1 is written as "01"
The unique Bluetooth address of device
12 digits Valid values '0'-'9' and 'A'-'F' or 'a'-'f'
Ex. "001256ABCDEF", "00BB592F030B"
User access PIN code
Ex. "1234"
4 digits
Use "0000" to disables use of access PIN code
for that particular user
Device power class
'1' = strong device
1 digit
'2' = standard device
1-3
'3' = weak device.
Default: '2'
www.mvc-data.com
2)
3)
E-mail info@mvc-data.com Phone +45 25 12 84 02
1)
2010-07-06 US 1.17
15/34